Page 358 - IS-Rayfast Catalogue - Issue 9, 2017

Connectors
DT Series IP68 Rating
Connector Series and Types, Overview
Commercial High Performance

1 Range of environmentally sealed connectors
designed for cable to cable applications.
Thermoplastic housings offer a wide operating
2 temperature range plus silicone rear wire
and interface seals allow the connectors to
withstand conditions of extreme temperature
3 and moisture.
Contact insertion and removal does not require
4 any special tools, with contacts retained in a
locked position by integral dielectric fingers.
Secondary wedge-locks are assembled at the
5 mating interfaces to provide proper contact
positioning.
6 DT Series - Environmentally sealed connector DT Series
designed for cable to cable applications on
the engine or transmission, under the bonnet,
7 on the chassis or in the cab. On signal level
circuits in harsh environment conditions - Size
16 contacts
8
DTM Series - Feature miniature contacts with DTM Series
enhanced design based on the DT Series.
9
DTM is the connector to be used in harsh
environmental applications such as around the
10 engine, transmission and under the bonnet -
Size 20 contacts
11 DTHD Series - Offers an environmentally DTHD Series
sealed, single power circuit termination with a
current rating from 25 to 100 Amps. The plug
12 features an integral coupling latch that provides
tactile and audible feedback during coupling -
Size 4, 8 or 12 contact.
13
DTP Series - Designed for power applications, DTP Series
to fill the need for higher amperage, multi-
14
pin connectors. Offers ability to use multiple
12 gauge contacts, each with a 25 amp
15 continuous capacity, within a single shell - Size
12 contacts
16
Full Range of Backshells,
17 Mounting Clips and Accessories
Available for the Complete
18
Solution

356 sales@is-rayfast.com | +44(0)1793 616700