Page 469 - IS-Rayfast Catalogue - Issue 9, 2017

Adhesives and Tapes
Epoxy and Hot Melt Adhesives
Selection Guide
Product Characteristics

Adhesive Product Characteristics Table (continued) - Epoxy/Thermosets 1
Pot Life Curing Shelf Life*
Product Spec. ** Comments
@ 23ºC Conditions @ 23ºC 2
Flexible low viscosity
24 hr @ 20ºC min.
S1005 20 min 1 year RK-6611 thermosetting general purpose
or 1 hr @ 95ºC
adhesive. 3
RT-1006 General purpose harnessing
96 hr @ 20ºC min. 2 years, 4
S1006 1hr RK-6612 adhesive. Not used on
or 1 hr @ 120ºC 1 year Kit 8 fluoroelastomer, silicone or PVDF.
A-A-56031***
5
24 hr @ 20ºC min. General purpose harnessing
2 years,
S1009 20 min or 1 hr @ 95ºC or 1 year Kit 8 RT-1009 adhesive. Not used on
45 min @ 120ºC fluoroelastomer or silicone. 6
90 min @ 155ºC. 1 year with One part epoxy tape used with
S1255-04 - RT-1014
or 15 min @ 260ºC refrigeration fluoroelastomer harness systems 7
8
RT-1011
24 hr @ 20ºC min. Good fluid resistance epoxy used
S1125 1.5 hrs 18 months RK-6619 9
or 1 hr @ 85ºC with system 25 components
VG-95343
10

Cure during 11
VG-95343 Pre-coated epoxy system for -25
/225 - installation of 36 months RK-6630 moulded parts
moulded parts
12
24 hr @ 20ºC min.
S1264 90 min 18 months RT-1012 Tested to NBC requirements
or 1 hr @ 85ºC
13
48 hrs @ 20ºC RK-6627 Conductive epoxy adhesive for
S1184 1 hr 6 months
or 2 hrs @ 80ºC RT-1084 use with screened terminations.
14
24 hrs @ 20ºC Two part general purpose flexible
RT125 1.5 hrs 18 months -
or 1 hr @ 85ºC harnessing adhesive.
15
* Shelf life from date of manufacture.
** For specific adhesion properties, see product specification sheets.
*** Only S1006 Kit A conforms to A-A-56031. 16
17

18

www.is-rayfast.com 467