Page 525 - IS-Rayfast Catalogue - Issue 9, 2017

Application Equipment
AD-1319-9 and AD-5000
Holding Fixture and Tinel Installation Tool
Installation Tooling

AD-1319-9 Holding Fixture 1
This useful hand held tool is used to quickly
and accurately install heat-shrinkable devices
and SolderTact shielded contacts. 2
This tool simplifies and speeds installation of
devices and SolderTact shielded contacts.
Fixture consists of two wire clamps that are 3
easily adjusted to center and secure the wire
or cable for installation. SolderTact contacts
4
require an adaptor (AT-1319-XX) that replaces
one of the clamps. The distance between
the adaptor and remaining clamp should be 5
approximately 38 mm.
Part Number Description Specifications 6
Dimension: 180 x 150 mm approx.
AD-1319-9 Holding fixture
Weight: 300g
Accessories - SolderTact ® 7
AT-1319-22 38999 Size 8 Contact Applicable Product Range
• SolderSleeve splices
AT-1319-78 38999 Size 16 Contact
• DuraSeal splices 8
AT-1319-12 Subminiature Contact
• MiniSeal splices
AT-1319-14 748 Contact • One-Step BNC/TNC connectors
• Shield terminators: D-100-XX, D-144-XX, 9
AT-1319-19 723 Contact
SO63, SO96
AT-1319-17 482 Size 16 Contacts
• SolderTact contacts: D-602-XX 10
11

12
AD-5000-TINEL-ASSY Installation Tool
The AD-5000 tool is a manually operated 13
resistance-heating tool designed to install the
Tinel-Lock rings in screened terminations.
Intended for small batches, the tool makes for 14
easy and consistently quickly installations, with
cycle time typically 5 to 15 seconds, depending
on ring size and braid type on the termination. 15
The tool accommodates Tinel-Lock rings from
size TR04 to TR24. Various electrode (jaws)
types can be used to install other ring sizes 16
and types.
17
Specifications
Supply 220-240 V, 50 Hz (2A fuse)
Dimension: 340 x 320 x 170 mm 18
Weight: 4.2kg

www.is-rayfast.com 523