Found across many industries including Aerospace, Automotive, OEM Electronics, Fabrication and Foundries, we offer an extensive range of applications covering bonding, potting, sealing, casting, moulding and coating.

EPOXY Thermoset Adhesives - up to 200ºC
Curable two-part epoxy adhesives S1005, S1006 and S1009.

S1005 - Two Part Polyamide Epoxy
Flexible, low viscosity thermosetting general purpose two-part adhesive, supplied in two bottles.
Operating temperature -55ºC to +135ºC
Kit 1 - 178ml bottle part A and 89ml bottle part B

S1006 - Two Part Polyamide Epoxy
General purpose harnessing adhesive. Flexible, low viscosity two-part epoxy.
Operating temperature -55ºC to +135ºC
Kit 1 - Two 15g packs
Kit 2 - Four 7.5g packs
Kit 8 - 50ml dual syringe
Kit A - Ten 3g packs

S1009 - Two Part Epoxy/polymercaptan Adhesive
Two part epoxy that provides a flexible environmental seal.
Operating temperature -55ºC to +135ºC
Kit A - Ten 3g packs
Kit 8 - 50ml dual syringe

HOT MELT TAPES Thermoplastic
Hot melt adhesive tapes and sealant tapes that flow when heated and set when cool. Includes S1017, S1030, S1048, S1297, S1255-04 and S1305 for solutions offering broad operating temperature ranges.

S1017 - General Purpose
General purpose, hot-melt thermoplastic adhesive supplied in tape form for easy application to cable substrates. A tough yet flexible adhesive, it is suitable for bonding polyolefins, vinyls, neoprene and metals such as steel and aluminium.
Operating temperature -20ºC to +60ºC
25mm x 0.3mm x 15m roll

S1030 - Low temperature
Non-flame retarded polyolefin based hot-melt adhesive tape. The product is recommended for high flexibility at temperatures as low as -80ºC. The tape is often pre-applied to low fire hazard moulded parts; its pre-coat designation is /180.
Operating temperature -80ºC to +80ºC
20mm x 0.3mm x 10m roll

S1048 - Hot Melt Adhesive tape
A hot-melt adhesive that can be supplied coated onto moulded parts as designation /86. It is generally used as a high-strength holt melt adhesive
Operating temperature -55ºC to +120ºC
25mm x 0.66mm x 30m roll

S1297 - Hot Melt Thermoplastic Adhesive Tape
hot-melt thermoplastic pre-coat adhesive designed for use with IS-Rayfast heavy duty boots and cable entry seals. It is suitable for bonding to various cable jacket substrates including Polyethylene, PVC, Polychloroprene and metals such as Steel and Aluminium
Operating temperature -20ºC to +90ºC
25mm x 0.3mm x 3m roll

S1255-04 - High Temperature Adhesive Tape
One part epoxy tape has been developed to match the superior chemical and heat resistance properties of IS-Rayfast's fluoroelastomeric high performance materials.
Operating temperature -55ºC to +200ºC
20mm x 0.5mm x 30m roll

S1305 - Halogen Free Hot Melt Sealant Tape
Flame retardant halogen free hot-melt thermoplastic grey butyl sealant designed for use with IS-Rayfast's heavy duty breakout moulded parts, to offer excellent water sealing and weatherproofing.
Operating temperature -40ºC to +90ºC
25mm x 1.6mm x 7.6m roll

EPOXY ADHESIVES - VG95343
S1125 is a flexible two-part epoxy high-performance adhesive, developed to match the superior chemical and heat resistance properties of DR-25 heat shrinkable tubing and -25 heat-shrinkable moulded parts.

RT125 is a specially formulated, flexible, two part, room temperature curing adhesive for general purpose wire and harnessing applications. An excellent bond is formed between metals, plastics and most cable insulation materials.

SILICONE TAPES
A range of self-amalgamating Silicone Elastomer tapes is compatible with various specifications including ASTM D2000, MIL-STD-417 and ASNA 5107. Offering operating temperatures up to 260ºC.

66N, 67N, 68N Silicone Tapes - Self-amalgamating
Used for sealing, connecting and finishing the cut ends of sleeves exposed to high temperature. These products can also be used to provide local protection to connection accessories and other wiring harness components.
• Operating temperature from -60ºC to +250ºC.

SRT Silicone Tapes - Self-amalgamating
SRT is a silicone rubber based material that is a tough, resilient, self-amalgamating tape, ideal for covering irregular shapes and objects. It can also be used for masking ends and sections of shafts and tubes.
• Operating temperature from -55ºC to +260ºC.
• ASTM D-2000 Classification FC, FE, GE.
• MIL-STD-417, TA.

POLYIMIDE ADHESIVE TAPE
High-temperature adhesive tape film, UL approved E113238, Offers flame resistance and electrical protection, can be used as a wire and cable wrap, as well as for solder masks for circuit boards. From -73ºC to +260ºC (adhesive backing rated at +200ºC).