TE’s dependable wire and cable termination products provide solutions for hundreds of wire and cable interconnect requirements. All wire termination products are housed inside transparent heat-shrinkable insulation sleeves, which provide inspect-ability and can provide various levels of environmental protection, ideal for industrial applications, through to the high-performance demands of the Aerospace, Defence and Motorsport markets.

Most termination products incorporate a fluxed solder preform, which offers a highly controlled soldering process or incorporate controlled crimping to provide high-reliability joints on the widest variety of conductor types and platings.
Many interconnect products have earned UL recognition or MIL-Spec approval. Many SolderSleeve® and related devices are made from polyvinylidene fluoride tubings that meet the requirements of AMSDTL-23053/8.

Wire to Wire Splices

SolderSleeve

For crimp free sealed wire to wire splicing. In a single step process, they solder, insulate, encapsulate, and strain relieve
wire to wire splices, in a wide range of sizes.

CWT Series splash proof, UL E87681
B-155 RoHS splash proof, UL E87681
D-1744 Series immersion sealed, NAS-1744

DuraSeal crimp

D-406 Series offers all in one heat shrink watertight seal and superior protection against corrosion and vibration. UL CUL E87681and Lloyds listed file 65 247 HH 02-93.

MiniSeal crimp

D-436 Series small lightweight and low-profile splices, substantially reduce wire bundle size and weight. Approvals
include SAE-AS81824/1.
D-200 Series high-temperature version of the D-436 series. Approvals include SAE-AS81824/1 (modified for 200ºC).
D-436-COLD Series simple one-step, self-sealing immersion resistant crimped in-line splice, that requires no heat. Approvals SAE-AMS-DTL-23053/8 and SAE-AS81824/12

Shield Terminators and Splices

Shield Terminators SolderSleeve

An environmentally sealed and insulated solder connector with the option of including a pre-installed ground lead or braid.

CWT Series for commercial applications.
B-155 Series RoHS compliant version of CWT for low-temperature cables where UL rating is required.
B-150 and B-151 Series suitable for Marine and RMT low fire hazard applications.
B-023 Series high-temperature terminator offering up to 260ºC performance and RoHS compliant. Thermochromic thermal indicator versions SO1, SO2 and SO3 Series designed for operating temperatures up to 150ºC, qualified to SAE-AS83519/1.
SO96 Series immersion resistant meets SAE-AS83519 and NAS1747, with operating temperature up to 175ºC. Bi-alloy thermal indicator versions
SO63# and SO175 Series immersion resistant meet SAE-AS83519 and environmental to NAS-1747#.
S-200 Series immersion resistant to SAE-AS83519 and operating temperature up to 200ºC.

Cable to Cable Splicing SolderShield

Designed for single or multi-conductor shielded cables, mantaining the EMI performance and integrity. Approvals
include RAF AP 1130-2008-1 and SAE-AS81824/1.

D-150 Series for temperatures up to 150ºC
D-200 Series for operating temperatures up to 200ºC.

Terminals

DuraSeal crimp terminals

B-106 Series terminals and disconnects protect against water, condensation, salt and corrosion. Their tough heat
shrinkable nylon tubing resists abrasion and cut through damage, provides strain relief and protects against vibration
damage. Quick and easy to install using a crimp tool and a heat source.

UL and CUL 91J4, file E87681 | Lloyds 65 247 HH 02-93
UL and CUL E157833 (B106-3 & B106-4 series)

Coaxial Cable Terminators

SolderSleeve coaxial cable terminators

CWT Series two-piece device for use on cables rated 85ºC (min). With cross-linked polyethylene tin plated 22 AWG lead.
B-155 Series RoHS compliant version of the CWT Series.
B-02x and B-04x Series single piece device for use on cables rated 125ºC (min), to M81822/13 or MIL-W-22759/32.
D-181 Series two-piece device that can interlock to form single piece, for use on cables rated 125ºC (min) with silver
or tin plated lead to M81822/13 or MIL-W-22759/32.
D-184 Series two-piece device that can interlock to form single piece, for use on cables rated 85ºC (min), with silver
or tin plated lead to M81822/13 or MIL-W-22759/32.

PinPostTab Terminators

SolderSleeve pin post tab

Simply position over the pre-stripped wire/pin and apply heat. Results in the perfect soldered, insulated and strain
relieving termination. Both UL and CUL E87681 recognised.

CWT offers performance up to 125ºC, utilising cross-linked heat shrinkable polyolefin insulation.
B-155 Series RoHS version of CWT above.
D-129 and D-141 Series performance up to 150ºC, cross-linked heat-shrinkable polyvinylidene fluoride insulation.

PCBCoax Terminators

SolderSleeve PCB coaxial terminators

Used for the termination of a coaxial cable to printed circuit boards. Pre-fluxed solder preform provides controlled soldering process.

D-607 Series matched impedance PCB terminators offering up to 2.3 GHz, metal body. Straight or right angle entry to
PCB and grid pattern.
B-046 Series PinPak terminators offering effective transmission up to 100 MHz.

Contacts high density

SolderTacts connector contacts

One-piece controlled soldering, designed to facilitate faster and more reliable terminations, eliminating the variables
associated with crimping, accelerates production while reducing handling and installed costs.

Enables a twisted pair or screened cable to be terminated in one simple operation, in a single contact.

D-602 and D-610 Series available in commercial, subminiature and MIL designs.

Application Guide

The table below is intended as a guide to help establish the device required for your application or contact us for more information.