Page 117 - IS-Rayfast Catalogue - Issue 9, 2017

Heat-Shrink Tubing
ATUM
4:1 3:1 Polyolefin
shrink shrink Adhesive lined

ATUM has an internal adhesive coating 1
that, when heated, melts and flows to form
a positive environmental barrier to prevent
moisture penetration. Used to seal back-end 2
connectors, wire splices, break-outs, cable
jackets and electrical components.
3
Features & Benefits
• Environmentally seals and protects
4
• Excellent mechanical protection
RoHS • Bonds to plastics, rubbers and metals.
compliant 5
Operating Temperature
• From -55ºC to +110ºC
Specifications & Approvals 6
• AMS-DTL-23053/4 Class 3 Installation
• UL E85381 600v, 110ºC (Black only) • Minimum shrink temperature +80ºC
• Minimum full recovery +110ºC 7

Inside Diameter Nom Wall Thickness Pack Size 8
Part Number
Supplied Recovered Total Wall Adhesive Wall 1.2m Sticks Spools
3.0 mm 1.0 mm 1.00 mm 0.50 mm 30m 150m ATUM-3/1-0-xx 9
6.0 mm 2.0 mm 1.00 mm 0.50 mm 30m 250m ATUM-6/2-0-xx
9.0 mm 3.0 mm 1.40 mm 0.60 mm 30m 200m ATUM-9/3-0-xx
10
12.0 mm 4.0 mm 1.78 mm 0.75 mm 30m 200m ATUM-12/4-0-xx
19.0 mm 6.0 mm 2.25 mm 0.80 mm 30m 150m ATUM-19/6-0-xx
11
24.0 mm 8.0 mm 2.54 mm 1.00 mm 30m 80m ATUM-24/8-0-xx
ATUM 3:1 Ratio
40.0 mm 13.0 mm 2.54 mm 1.00 mm 12m 60m ATUM-40/13-0-xx
12
4.0 mm 1.0 mm 1.00 mm 0.50 mm 30m 150m ATUM-4/1-0-xx
8.0 mm 2.0 mm 1.00 mm 0.50 mm 30m 200m ATUM-8/2-0-xx 13
12.0 mm 3.0 mm 1.40 mm 0.60 mm 30m 200m ATUM-12/3-0-xx
16.0 mm 4.0 mm 1.78 mm 0.75 mm 30m 200m ATUM-16/4-0-xx
14
24.0 mm 6.0 mm 2.25 mm 0.80 mm 30m 80m ATUM-24/6-0-xx
32.0 mm 8.0 mm 2.54 mm 1.00 mm 12m 60m ATUM-32/8-0-xx
ATUM 4:1 Ratio
15
52.0 mm 13.0 mm 2.54 mm 1.00 mm 6m 30m ATUM-52/13-0-xx
For supply to AMS-DTL23053 add -MS suffix to part number.
Wall thickness will be less if tubing recovery is restricted during shrinkage. 16
Where xx is either STK (sticks) or SP (spools). Standard colour.
Size selection - The largest size that will recover snugly over the component(s).
17
Colours Available
18
0 = Black

sales@is-rayfast.com 115