Page 118 - IS-Rayfast Catalogue - Issue 9, 2017

Heat-Shrink Tubing
CGAT
Commercial Grade, Polyolefin 3:1
Adhesive lined shrink

1 Used to seal back-end connector, wire splices,
break outs, cable jackets and electrical
components. Includes an internal adhesive
2 coating, that when heated, melts and flows to
form a positive environmental barrier to prevent
moisture
3
Features & Benefits
• Environmentally seals and protects
4
• Excellent mechanical protection
• High strength bonding RoHS
5 compliant
Operating Temperature
• From -30ºC to +80ºC
6 Specifications & Approvals
Installation • UL E85381, 600v, 80ºC
• Minimum shrink temperature +80ºC • FMVSS 302
7 • Minimum full recovery +115ºC

8 Inside Diameter Nom Wall Thickness Pack Size
Part Number
Supplied Recovered Total Wall Adhesive Wall 1.2m Sticks Spool
9 3.0 mm 1.0 mm 1.00 mm 0.50 mm 30m 150m CGAT-3/1-0-xx
6.0 mm 2.0 mm 1.00 mm 0.50 mm 30m 250m CGAT-6/2-0-xx
10 9.0 mm 3.0 mm 1.35 mm 0.60 mm 30m 200m CGAT-9/3-0-xx
12.0 mm 4.0 mm 1.50 mm 0.70 mm 30m 200m CGAT-12/4-0-xx
18.0 mm 6.0 mm 1.70 mm 0.80 mm 30m 150m CGAT-18/6-0-xx
11
24.0 mm 8.0 mm 1.90 mm 1.00 mm 30m 80m CGAT-24/8-0-xx
39.0 mm 13.0 mm 2.10 mm 1.00 mm 12m 60m CGAT-39/13-0-xx
12
Wall thickness will be less if tubing recovery is restricted during shrinkage.
Where xx is either STK (sticks) or SP (spools).
13 Size selection - The largest size that will recover snugly over the component(s).

14

15

16

17
Colours Available
CLEAR
18
0 = Black X = Clear S S Denotes: Made to special order only, non flame retardant.

116 www.is-rayfast.com | +44(0)1793 616700