Page 369 - IS-Rayfast Catalogue - Issue 9, 2017

Backshells
Screened Backshell Types

BRAIDED TAIL 1
Supplied complete with a braided tail that has
been secured by a magna-form crimp ring.
Braid shield accommodates a range of cable 2
diameters. This allows a standard entry size
XXXX to be used with most cable sizes and can be
®
terminated using a SolderSleeve device. 3
MEMORY RING 4
Special shape memory metal ring that shrinks
uniformly when heated, offering very secure
360º clamp of the screening braid onto the 5
backshell. Withstands shock, vibration and
XXXX temperature cycling.
Requires specialist tooling. 6
Braid screen not included

BAND CLAMP 7
Where the cable screening braid is clamped to
the backshell via a mechanical metal strap.
Hand tool required. 8
XXXX
9
Braid screen not included

CONSTANT FORCE SPRING (CFS) 10
Cable screening braid is secured to the
backshell via constant force spring wrapped
11
around the braid.
Does not need any tooling.
XXXX
12
Braid screen not included
INDIVIDUAL SCREEN 13
This system offers the greatest EMI/EMC
integrity, providing 360º shielding in the
termination area of each individual wire/cable 14
plus collective screen cable versions (shown).
System offers a significant improvement over
XXXX pigtail termination methods. 15
Braid screen not included
BOOT ASSEMBLY 16
Supplied as a complete assembly utilising
®
Rayatan heat shrink screened boot technology
that includes an internal lining that offers 17
shielding levels better than 80 dB at 100 MHz.
XXXX Avoiding the requirement for a separate metal 18
screening braid.

www.is-rayfast.com 367