Page 495 - IS-Rayfast Catalogue - Issue 9, 2017

Adhesives and Tapes
High Temperature Ceramics
Maximum Operating Temp. up to 340ºC
Properties and Part Selection

Selection Table - Ceramic-Based Adhesive Properties (Continued) 1
Features Silica Fast Set Ultra Temperature Metallic
2
Properties 905 940 904 931 950 952 954

Low
Properties Zircon Zirconia Graphite Alumina Nickel Stainless 3
expansion
4
Service Temperature 1370ºC 1100ºC 2200ºC 2980ºC 650ºC 1100ºC 1100ºC

Base SiO Zircon ZrO Carbon Aluminium Nickel 316SS 5
2 2
Compression Strength psi 3200 4000 6000 3000 4000 5000 4500
6
Flexural Strength psi 2100 1800 3000 1500 3000 3000 2500
7
Thermal Expansion 0.5 8.1 7.4 7.4 18.0 7.2 18.0
(x 10-6 / ºC)
Thermal Conductivity W/mºC 1.9 1.15 1.4 8.6 6.3 2.0 1.4 8
Dielectric Strength kV/mm 7.8 4.87 9.75 Cond. Cond. Cond. Cond.
9
Volume Resistivity ohm-cm 10 11 10 8 10 8 Cond. Cond. Cond. Cond.
10
Components 2 2 1 2 2 2 2
Mix Ratio (by weight) 100:60 100:28 n/aA 100:35 100:60 100:120 100:25 11

Colour White Tan Tan Black Grey Grey Grey
12
Consistency Paste Paste Paint Paste Paste Paste Paste
13

14
®
Resbond 970 Kit
Ceramic Adhesive Selector Kit
This selector kit contains seven 4 oz sample 15
bottles of speciality adhesives (901 fibre based,
919 Electrically Resistant, 940 Fast Setting
Ceramic, 950 Metallic Aluminium, 989 General 16
Purpose, 7030 High Strength and 907GF
Adhesive and Putty).
17
The 970N Selector Kit is the ideal choice for
simplifying product evaluation and selection.
Resbond 970N Selection Kit 18

www.is-rayfast.com 493