Page 345 - IS-Rayfast Catalogue - Issue 9, 2017

Accessories
Lacing Tape
Cords and Yarns
General Information

Finishes Part Number System - Example 1
The table below shows the finishes that are As a guide to constructing your part number
available that meet the requirements of CID- identified below is an example based on...
A-A-52080 to CID-A-A52084 (MIL-T-43435), as • Type I - Nylon Tape CID-A-A-52080 2
well as demanding industrial and commercial
applications. Finishes are generally used to • MIL ref for Type 1, Size 3, Finish B
improve a lacing tapes physical properties and Based on premise that a Gudebrod 3
performance characteristics. Not all finishes are manufactured part is required...
available on all products, for further information
please contact us. 18 W Black Part No. example 4
5
Colour
Standard colours are
Natural and Black.
1. Material / Finish Selection For additional colours 6
please contact us
Designation Description
Material Designation
MIL Gu Br 7
Cross reference with
A U -1 No Finish Mil ref...See table 1
Finish B = W (Gu)
B W -2 Micro-crystaline, Fungicidal Wax 8
-2 (Br)
C H -3 Synthetic Rubber or Elastomer
Part Number
C Z n/a Flame Retarded Rubber 9
Size 3 = 18 (Gu)
C PTH n/a Low Out-gassing Rubber 103 (Br)
D T -4 Teflon
10
E R -5 Vinyl
F S -6 Silicone Resin
11
G B/G -7 Liquid Nylon
# n/a -8 Self extinguishing
12
# Meets requirements of Finish C
(Gu = Gudebrod and Br = Breyden)
13
14

15

16

17

18

www.is-rayfast.com 343