Page 346 - IS-Rayfast Catalogue - Issue 9, 2017
P. 346

Accessories
      Specifying Information
      Lacing Tapes and Yarns
      Fibre Type

  1   NYLON Tape CID-A-A-52080 (formerly MIL-T-43435 Type I)
      Flat braid manufactured from high tenacity, continuous filament nylon yarn. Temperature range:
      -55ºC to 121ºC, melting point 248ºC. Available with a variety of finishes as per table.
  2    •  General purpose
      POLYESTER Tape CID-A-A-52081 (formerly MIL-T-43435 Type II)
      Flat braid manufactured from high tenacity, continuous filament polyester yarn. Temperature range
  3
      -73ºC to 177ºC, melting point 250ºC. Available with a variety of finishes as per table.
       •  Superior knot tying properties to Nylon
  4    •  High temperature performance, available in a range of finishes
       •  Suitable for aerospace/NASA applications
       •  Also available ‘Pre-shrunk’ to reduce longitudinal shrinkage.
  5   TEFLON Tape CID-A-A-52082 (formerly MIL-T-43435 Type III)
      Flat braid manufactured from high tenacity, continuous filament Teflon yarn. Temperature range
      -73ºC to 232ºC, melting point 327ºC. Available with a variety of finishes as per table.
  6    •  High temperature performance, available in a range of finishes
       •  Good resistance to fluids and solvents
       •  Suitable for aircraft engine applications
  7
       •  Also available ‘Pre-shrunk’ to reduce longitudinal shrinkage.
      GLASS Tape CID-A-A-52083 (formerly MIL-T-43435 Type IV)
  8   Flat braid manufactured from high tenacity, continuous filament glass yarn coated with Teflon before
      braiding. Temperature range to -55ºC to 427ºC, melting point 1150ºC. Available with a variety of
      finishes as per table.
  9    •  Extremely high temperature performance
       •  Very low elongation
       •  Minimal fibre to fibre abrasion
  10   •  Produced from continuous filament electrical grade glass (E-Glass).
      NOMEX  Tape CID-A-A-52084 (formerly MIL-T-43435 Type V)
            ®
  11  Flat braid manufactured from high tenacity, continuous filament Nomex yarn. Temperature range
      -55ºC to 260ºC, melting point 371ºC. Available with a variety of finishes as per table.
       •  Excellent high temperature performance and Non flammable
  12   •  Highly resistant to fluids and lubricants
       •  Suitable for critical aircraft harness applications, identifiable by a green coloured tracer.
      NYLON Cord MIL-T-713 Type P, Class 1
  13
      Meets or exceeds MIL-T-713 Type P. Round twisted 3 ply nylon cord manufactured from high
      tenacity, continuous filament yarn. Temperature range -55ºC to 121ºC. Available with no finish, or
      micro-crystalline fungicidal wax finish.
  14
            ®
      NOMEX  Overbraiding Yarn PAA MIL-C-572
      Continuous Filament Nomex yarn twisted to form an essentially round bundle. Available unbonded
  15 or bonded with a non-corrosive liquid nylon finish. Temperature range -55ºC to 260ºC, melting point
      371ºC. Packaged on cardboard tubes or plastic ratchet bobbins for use on New England Butt #2
      braiding machines, other packages are available.
  16 •  General purpose
      •  Superior abrasion and fluid resistance
  17
      Polyester overbraiding yarn (MIL-C-572 Type PSTR) is also available, please contact us for further
      information or to discuss further.
  18



    344            sales@is-rayfast.com  |  +44(0)1793 616700
   341   342   343   344   345   346   347   348   349   350   351