Page 486 - IS-Rayfast Catalogue - Issue 9, 2017

Adhesives and Tapes
Electrically Conductive Epoxy
Duralco Product and Properties Guide
®
Electrical and Industrial Applications
®
1 Duralco Conductive adhesives and potting
compounds provide the conductivity required
for many high temperature electronic and
2 industrial applications. They will bond to glass,
ceramics, metals and plastics, offering excellent
resistance to most chemicals and solvents.
3
Applications include solder replacement, semi-
conductor bonding, shielding, electronics,
4 circuit board repair, etc.
Duralco 120 - 260ºC Silver based
5 Epoxy that cures at room temperature to form
electrically conductive bond lines for use up to
260ºC. Ideal for forming electrically conductive
6 bonds, attaching heat sensitive components
and as a solder replacement.
7 Duralco 122 - 260ºC Nickel based
Nickel filled adhesive and casting epoxy is
specially formulated to provide an economical
8 alternative to silver filled conductive epoxies.
Ideal for use in applications where the ultimate
in electrical conductivity is not required.
9
Duralco 124 - 340ºC Ultra Temp, Silver based
10 Two component, silver filled adhesive for High
Power applications. Mix & cure with mild heat.
11 Duralco 125 - 230ºC Flexible, Silver based
Easy to use, “one to one”, applicator kit. Just
dispense, mix and apply this smooth creamy
12 paste and cure at room temperature. Bonds
to most metals, ceramics and plastics to form
stress free, electrically conductive bonds. Performance Chart
13
Duralco 126 - 230ºC One part, Silver filled
A single component highly conductive Part Number Thermal Minutes @ Size
14 epoxy specifically designed for production Volume Resistance Conductivity Cure Cycle Hours @ Cure Cycle
applications. No mixing, no mess, just dispense
and heat cure. Commonly used in automatic
15 Ω-cm W/mºC 25ºC 95ºC oz
dispensing equipment.
120 0.0* 7.20 16-24 10 2
16 Duralco 127 - 200ºC Graphite based 122 0.7 2.16 16-24 10 4
Easy to use, “one to one”, applicator kit. Just
dispense, mix and apply. This smooth creamy 124 0.002 7.20 4@120ºC N/A 2
17 paste cures at room temperature and is ideal 125 0.002 5.76 16-24 20 1
for low cost production applications. Can be
126 0.002 7.20 1/2@135ºC 10@160ºC 2
used in automatic dispensing equipment.
18 127 0.02 3.60 16-24 20 2.5
* Denotes 0.00008 actual

484 sales@is-rayfast.com | +44(0)1793 616700