Page 191 - IS-Rayfast Catalogue - Issue 9, 2017

Moulded Parts
222A111 to 196
As supplied
Non-Lipped
Right Angle 90º, boot

Mechanical protection and strain relief. As
H Dia. J Dia. 1
the part does not have a lip it can be installed
directly onto the connector accessory thread.
2
Ordering Information
• Standard colour Black.
3
• Please specify the product name, size,
After Recovery
material, coating and any modifications
required, as per Part Number System
P 4
U earlier in this section.
W • Adhesive coating is optional. If added the
entry dimension diameter will be reduced 5
J Dia. by 1.5mm.
R • Moulded parts are individually packaged.
T • Dimensions apply to all available materials 6
JO
unless otherwise stated.
H Dia. 7

Product Dimensions Selection Table 8
Dimensions as Supplied Dimensions After Recovery
Dimension H J H J P ±10% R ±10% T ±10% U ±10% JO ±10% W ±10% Weight 9
Material All 3, 4, 25 100 12
Part Number
10
222A111 17.8 17.8 10.9 9.9 7.9 3.8 17.3 20.1 - 11.4 4.3 1.02 0.9g
222A121 24.9 24.9 16.0 18.0 10.2 5.3 21.3 22.6 - 14.7 5.8 1.27 1.4g
11
222A132 30.0 30.0 21.1 20.6 14.2 6.4 26.9 26.7 19.1 17.8 7.1 1.52 2.9g
222A142 32.5 32.5 22.9 22.9 17.3 6.9 36.6 30.5 19.1 24.9 10.2 1.78 5.4g
12
222A152 36.1 36.1 27.4 26.4 21.8 8.4 43.7 35.1 19.1 30.0 12.7 1.78 7.7g
222A163 43.9 43.9 28.4 27.4 27.4 9.4 53.6 43.9 19.1 34.0 17.3 2.03 13.0g
13
222A174 53.1 53.1 48.3 46.7 33.8 15.0 75.7 52.8 25.4 53.2 32.0 3.30 31.0g
222A185 67.6 67.6 58.4 54.4 44.2 20.3 97.5 66.0 25.4 71.1 40.6 3.81 -
14
222A196 87.6 87.6 68.8 63.0 55.4 23.4 128.0 79.2 25.4 87.6 56.4 4.57 -
All dimensions in mm unless otherwise stated. Weight is based on polyolefin part
Injection and potting ports also available see part number system earlier in this section
15
Materials Available Environmental Adhesives Available
Material Material Description Optional Pre-coat Optional User Applied 16
-3 Semi-rigid polyolefin /42 or /86 S-1017 or S-1048
-4 Flexible polyolefin /42 or /86 S-1017 or S-1048 17
-12 Fluoro-elastomer N/A S-1255-04
-25 Fluid resistant elastomer /42 or /86 or /225 S-1017 or S-1048 or S-1125
18
-100 Polyolefin, Zerohal /86 or /180 S-1048 or S-1030

www.is-rayfast.com 189