Page 192 - IS-Rayfast Catalogue - Issue 9, 2017

Moulded Parts
202K111 to 185
As supplied
Lipped
Straight, boot

1 Mechanical protection and strain relief. H Dia. J Dia.
Part includes a lip or lips as required, can
be installed onto circular adaptors of the
2 appropriate shell size.
see eyelet note
Ordering Information
3
• Please specify the product name, size,
material, coating and any modifications After Recovery
4 required, as per Part Number System P
earlier in this section.
R Y
• Adhesive coating is optional. If added the X
5 entry dimension diameter will be reduced U Tan Slight
by 1.5mm. taper
• -12 material is supplied without eyelet, if
6 required add CS-1863 to part number H Dia. J Dia.
• If eyelet clip (000W212) is required with
potting ports then add CS-1858 to part JO
7 number HW Removal of lip JW

8 Product Dimensions Selection Table
Dimensions as Supplied Dimensions After Recovery
Nom.
9 Dimension H J H J P ±10% R ±10% U ±10% JO ±10% HW ±10% JW min Weight
Material 3, 4, 25 12 100
Part Number
10
202K111 17.0 17.0 13.0 14.0 6.9 3.0 39.0 24.0 n/a 10.8 1.3 0.7 1.3g
202K121 24.0 24.0 13.0 14.0 10.4 5.6 38.0 21.0 12.0 8.5 1.9 0.41 2.4g
11
202K132 30.0 30.0 14.0 15.0 14.2 5.9 55.0 32.0 12.0 11.5 1.8 0.81 4.8g
202K142 31.0 31.0 16.0 18.0 18.0 7.1 67.0 35.0 20.0 17.0 1.8 0.81 9.9g
12
202K153 36.0 36.0 19.0 21.0 22.4 8.4 80.0 42.0 20.0 19.5 2.0 0.81 12.0g
202K163 43.0 43.0 22.0 25.0 28.2 9.9 99.0 61.0 20.0 21.0 2.2 0.81 20.0g
13
202K174 60.0 60.0 35.0 39.0 35.1 15.7 130.0 72.0 20.0 39.0 3.3 1.02 44.5g
202K185 66.0 66.0 38.0 42.0 44.5 16.8 170.0 90.0 20.0 51.5 3.8 1.63 -
14 All dimensions in mm unless otherwise stated. Weight is based on polyolefin part. Injection and potting ports also available see part
number system earlier in this section.
202K111 only available with single lip and without eyelet. 202K121 thru 202K153 supplied with two lips only.
Removal of lip(s) will reduce length of the boot, see part numbering page.
15
Materials Available Environmental Adhesives Available
16 Material Material Description Optional Pre-coat Optional User Applied
-3 Semi-rigid polyolefin /42 or /86 S-1017 or S-1048
-4 Flexible polyolefin /42 or /86 S-1017 or S-1048
17
-12 Fluoro-elastomer N/A S-1255-04
-25 Fluid resistant elastomer /42 or /86 or /225 S-1017 or S-1048 or S-1125
18
-100 Polyolefin, Zerohal /86 or /180 S-1048 or S-1030

190 sales@is-rayfast.com | +44(0)1793 616700