Page 195 - IS-Rayfast Catalogue - Issue 9, 2017

Moulded Parts
Instalite Molded Boots 222K111-25L to 185-25L
InstaLite Lipped
Right Angle 90º, boot

up to 30% LIGHTER 1
INSTALITE moulded boots advanced materials
science drives weight savings and reduces
2
installation time, with high-performance heat
shrink shape memory boots.
3

4

5

6

7

InstaLite Product Dimensions Selection Table 8
Dim. Supplied Dimensions After Recovery Avg. Weight
Saving
Dimension H J H J P ±10% R ±10% S ±10% HW ±20% JW min
9
Part Number
202K121-25L 24.0 24.0 10.4 5.6 25.0 25.0 19.0 1.3 0.9 30%
10
202K132-25L 30.0 30.0 14.2 5.9 32.0 27.0 20.0 1.3 1.0 26%
202K142-25L 31.0 31.0 18.0 7.1 39.0 31.0 21.0 1.2 1.0 21%
11
202K153-25L 36.0 36.0 22.4 8.4 46.0 38.0 26.0 1.5 1.0 26%
202K163-25L 43.0 43.0 28.2 9.9 55.0 45.0 30.0 2.0 1.2 21%
12
202K174-25L 60.0 60.0 35.1 15.7 80.0 54.0 35.0 2.3 1.5 23%
202K185-25L 66.0 66.0 44.5 16.8 108.0 68.0 42.0 1.8 2.0 25%
13
All dimensions in mm unless otherwise stated.
14
INSTALITE boots are a lighter weight
alternative to our standard -25 heat shrink
boots. Utilising fluid-resistant modified 15
elastomers, the Instalite boots offer semi-rigid,
Environmental Adhesives Available
abrasion resistant boots that are up to 30%
lighter than standard -25 boots. Optional Pre-coat Optional User Applied 16
The boots offer the same balance of high /225 S-1125
temperature fluid resistance and long term heat
resistance as the standard modified elastomer 17
boots.
18

www.is-rayfast.com 193