Page 196 - IS-Rayfast Catalogue - Issue 9, 2017
P. 196

Moulded Parts
      202S121 to 174                         As supplied
      Lipped
      Straight, Rayaten  Screened boot
                   ®
  1   Ideally suited for harness applications where
      high levels of screening are required between
      the cable and connector.
  2
      Ordering Information
       •  Standard colour Black.
  3    •  Size selection please refer to table below.
       •  When ordering specify the product name,   After Recovery
         size, material and modifications required,
  4
         as per Part Number System.
       •  Moulded parts are individually packaged.
       •  Dimensions apply to all available materials
  5
         unless otherwise stated.

  6

  7


  8   Product Dimensions Selection Table
              Dimensions as Supplied          Dimensions After Recovery
  9    Dimension  H        J      H    J  P ±10% R ±10% S ±10% T ±10% U ±10% JO ±10% Weight
        Material  3, 25  100  3, 25  100
      Part Number
  10
      202S121  20.0  14.0  11.0  10.0  10.4  5.0  45.0  17.0  3.0  1.0  10.0  15.0  4.0g
      202S132  24.0  20.0  15.0  12.0  14.2  6.0  60.0  28.0  3.0  1.0  10.0  17.0  7.2g
  11
      202S142  31.0  26.0  18.0  14.0  18.0  7.2  72.0  32.0  3.0  1.0  10.0  20.0  10.6g
      202S152  36.0  32.0  22.0  20.0  22.4  8.5  85.0  31.0  3.0  1.0  15.0  25.0  15.8g
  12
      202S163  43.0  38.0  26.0  24.0  28.2  10.0  110.0  50.0  3.0  1.3  20.0  30.0  27.5g
      202S174  47.0  41.0  36.0  32.0  35.1  15.8  135.0  70.0  3.0  1.3  20.0  30.0  70.3g
  13
      All dimensions in mm unless otherwise stated. Weight is based on polyolefin part
  14
      Materials Available                    Environmental Adhesives Available
           Material     Material Description  Optional Pre-coat  Optional User Applied
  15     -3C previously 3S  Semi-rigid polyolefin  /42 or /86   S-1017 or S-1048

        -25C previously 25S  Fluid resistant elastomer  /42 or /86  S-1017 or S-1048 or S-1125
  16   -100C previously 100S  Zerohal            /86 or /180    S-1048 or S-1030
      Electrically Conductive Adhesive      Environmental Sealing Adhesives
  17  The recommended conductive adhesive to be used   A choice of environmental sealing adhesives are
      with screened moulded parts is S-1184 (ordered   available as either a pre-coat or user applied
      separately) and can be found in the Adhesives and   adhesive, see table above. For more information on
  18 Tapes section of this catalogue. Installation code of   materials and adhesives, please refer to relevant
      Practice guide is available on request.  sections of this catalogue.


    194            sales@is-rayfast.com  |  +44(0)1793 616700
   191   192   193   194   195   196   197   198   199   200   201