Page 255 - IS-Rayfast Catalogue - Issue 9, 2017

Terminals and Splices
CWT / B155 / D1xx Series
SolderSleeve ®
Wire Termination to Pin, Post & Tabs

Wire Size Terminal Characteristics 1
Part Number
AWG Dimensions mm Shape
CWT-1501 B155-1501 24 W 2
W = up to 0.63
CWT-1502 B155-1502 20
CWT-1501 B155-1501 24 Pin 3
CWT-1502 B155-1502 22 W = 0.63 to 0.89
CWT-1503 B155-1503 20
4
CWT-1502 B155-1502 24 - 22 W
W= 0.89 to 1.14
CWT-1503 B155-1503 20 - 18 Post
CWT-1503 B155-1503 24 - 22 5
W = 1.14 to 1.52
CWT-1504 B155-1504 20 - 18
6
CWT-1501 B155-1501 24 - 20 W= up to 1.52 W
CWT-1502 B155-1502 24 - 18 W = 1.27 to 2.28
CWT-1503 B155-1503 24 - 18 W = 1.77 to 2.79 Tab 7
CWT-1504 B155-1504 24 - 18 W = 2.54 to 3.8
CWT-1505 B155-1505 22 - 16 W = 2.28 to 4.7 8

Wire Size Terminal Characteristics 9
Part Number
AWG Dimensions mm Shape
D-141-30* 30 - 26 W 10
W = up to 0.61
D-141-07* 24 - 22
Pin
D-141-31* 20 W = 0.63 to 0.81 11
W
D-141-56 W = 0.76 to 1.27 12
Post
24 - 20
D-129-05* W = up to 1.52
13
W
D-129-03* W = 1.27 to 2.28
24 - 20 Tab 14
D-129-0043 W = 2.28 to 3.55
15
* Denotes available on tape carrier version, please contact us for details.

16

17

Notes:
• Heat guns are recommended for the installation of these devices: HL2010E and CV198X with the correct 18
reflector added. See Application Equipment Section.

www.is-rayfast.com 253