Page 253 - IS-Rayfast Catalogue - Issue 9, 2017
P. 253
Terminals and Splices
Pin, Post & Tab
Wire termination
Easy One-Step SolderSleeve 1
®
Connecting Wire to Pin, Post
or Tab Contacts 2
Each terminator consists of heat-shrinkable 3
sleeve containing pre-fluxed solder preform.
To install simply position over the wire/pin
and apply heat. The sleeve will shrink and 4
the solder will melt and flow, resulting in a
perfectly soldered, insulated and strain relieved
termination. 5
On connectors where there are several pins
to be terminated it is possible to position
Solder ring 6
and recover an entire row of solder sleeves
in one go. Recommended for use with most
connector pins/posts/tabs applications such as 7
LED’s, switches, multiple row/pin connectors
Designed for applications with temperatures
Pin, Post or Tab
up to 150°C. SolderSleeve terminators are also 8
available on carrier tape, spaced precisely to
match connector terminal spacing, enabling
the termination of an entire row of wires at any 9
one time.
10
SolderSleeve Terminators
CWT and B155 Series 11
Offers performance up to +125ºC, utilising
cross linked, heat-shrinkable polyolefin
insulation. 12
SolderSleeve Terminators
D-129 and D-141 Series 13
Offers performance up to +150ºC utilising
cross linked, heat-shrinkable polyvinylidene
fluoride insulation. 14
15
16
17
18
www.is-rayfast.com 251