Page 258 - IS-Rayfast Catalogue - Issue 9, 2017

Terminals and Splices
Shield Termination
SolderSleeve ®
Heat Shrinkable, Shield termination

1 Product Selection Process
1 Select product series from the Product
Series Selection Guide on previous page.
2 2 Determine cable dimensions for Jacket OD
and Shield OD.
3 Optional: Select pre-installed wire lead
3
type from the table below. Only B-155, SO96, SO175 and S200X RoHS
4 Select part number from the product
4 selection tables on the following pages.
RoHS
5 compliant compliant

6 Pre-installed Lead Description
Length
Product Series Approval Type Plating AWG Min. Colour
7
S200 SAE-AS83519 M22759/91 Silver 22 150mm White
ST18, ST63 NAS 1747 55A0111 Tin 20-26
8
SO63 SAE-AS83519 55A0111 Tin 20-26
150mm White/Black
S02 M83519 55A0111 Tin 20-26
9
SO96, SO175 SAE-AS83519 55A0813 Nickel 22
B-151 LFH 100G0111 Tin 18 150mm White
10 B-155 RoHS XL polyethylene Tin 22
150mm White & Green
CWT Commercial XL polyethylene Tin 22
11 SO63, SO96, SO175 SAE-AS83519 Braid Strap Nickel 22
SO3 Commercial Braid Strap Tin/Nickel 22 150mm Un-insulated
12 S200 SAE-AS83519 Braid Strap Nickel 22

13

Jacket OD (A)
14 Product Selection Tables:
Insulation OD (C)
Please see the following tables for part number
15 cross reference for given size of cable jacket
Ø (A); Shield Ø (B) and Insulation Ø (C). Please
contact us for more information or advice on
16 correct product if required.

Shield OD (B)
17
Note:
18 • Heat guns are recommended for the installation of all these devices on the following pages: HL2010E and
CV198X with the correct reflector added. See Application Equipment Section.

256 sales@is-rayfast.com | +44(0)1793 616700