Page 267 - IS-Rayfast Catalogue - Issue 9, 2017

Terminals and Splices
CWT and B-155 Series
125ºC SolderSleeve ®
Heat Shrinkable, Termination

Product Characteristics 1
Material
Insulation for B-02X/B-04X, D-181, D-184 Radiation crosslinked, heat-shrinkable polyvinylidene fluoride 2
Insulation for CWT, B-155 Series Radiation crosslinked, heat-shrinkable polyolefin
Solder and flux for B-02X, B-04X, D-181 Solder Sn63 Pb37 Flux: ROL 1 per ANSI-J-004 (RMA Flux) 3
Solder and flux for CWT series, D-184 Solder Sn50 Pb32 Cd18 Flux: ROM1 per ANSI-J-004 (RA Flux)
Solder and flux for B-155 series Solder: Sn42Bi58 Flux: ROM1 per ANSI-J-004 (RA(Flux)
4
Typical Performance
5
Voltage drop 2.0 mV
Tensile strength Exceeds strength of conductor
6
Dielectric strength 2.0 kV
Temperature rating for CWT, B-155 & D-184 -55ºC to +125ºC
7
Temperature rating for B-02X/B-04X, D-181 -55ºC to +150ºC
Insulation resistance 1000 M ohms
8

9
Part A, Ground
TABLE A - for CWT and B-155 Series Solder preform 10
Dimensions (mm) Part Number
Cable RG No
Dielectric OD Jacket OD CWT Series B-155 Series (RoHS) 11
174 0.80 - 2.30 1.30 - 2.80 CWT-4174-W122-5/9 B-155-4174-W122-5/9
58, 122 2.00 - 2.80 2.50 - 4.40 CWT-4058-W122-5/9 B-155-4058-W122-5/9 12
59 2.80 - 3.30 3.20 - 6.00 CWT-4059-W122-5/9 B-155-4059-W122-5/9
Note: Only B-155 series is RoHS compliant, CWT is not.
13

Part A, Ground 14
Solder preform
Part B, Conductor
15

16

17

18

Part B, Conductor
www.is-rayfast.com 265