Page 271 - IS-Rayfast Catalogue - Issue 9, 2017

Terminals and Splices
D-607 and B-046 Series
PCB Terminators SolderSleeve ®
Heat Shrinkable, termination

Product Characteristics 1
Material
Insulation Radiation crosslinked, heat-shrinkable polyvinylidene fluoride 2
Solder and flux Solder Sn63 Pb37 Flux: ROL 1 per ANSI-J-004 (RMA Flux)
Termination body/pin Copper alloy, solder-plated 3
Typical Performance
Voltage drop 2.0 mV
4
Tensile strength Exceeds strength of conductor
Dielectric strength 2.0 kV
5
Temperature rating -55ºC to +150ºC
Insulation resistance 1000 M ohms
6
Electrical Performance (typical) D-607 Series Only
Frequency VSWR (D-607-09, -40) VSWR (D-607-10)
7
350 MHz 1.04 max 1.04 max
700 MHz 1.05 max 1.09 max
8
2.3 GHz 1.09 max 1.12 max
9
TABLE A for D-607 Series
RG Cable Cable Dimensions Max. Diameter Part No. Entry to PCB
No. Jacket Shield Dielectric Straight Right-Angle Straight 10
Grid 5.08 Grid 5.08 Grid 2.54
11
174, 178, 179,
1.5 - 3.55 1.1 - 3.15 0.60 - 2.25 D-607-09 D-607-10 D-607-40*
316, 404
All dimensions in millimetres
12
TABLE B for B-046 Series
13
RG Cable Pin Part Number
Cable Dimensions (mm)
No. Dia.
Spacing Between Pins
14
A B C D (max) mm 2.54 5.08 6.35
0.6 B-046-10-N B-046-12-N
178, 404 0.3 - 0.8 0.5 - 1.7 1.3 - 2.3 3.4 B-046-14-N 15
0.8 B-046-11-N B-046-13-N
0.6 B-046-66-N B-046-16-N
179, 316 0.3 - 1.6 1.2 - 2.5 1.5 - 2.8 4.4 B-046-15-N 16
0.8 B-0466-68-N B-046-18-N
All dimensions in millimetres
17
Notes:
• Heat guns are recommended for the installation of these devices: HL2010E and CV198X with the correct 18
reflector added. See Application Equipment Section.

www.is-rayfast.com 269