Page 240 - IS-Rayfast Catalogue - Issue 9, 2017

Terminals and Splices
SGRS Closed End Connector B
SolderGrip ®
Self Fixing Solder End

1 Features & Benefits
• PVDF insulation sleeve provides
encapsulation, inspectability & strain relief.
2 • Spiral copper coil grips and compresses
the conductors for the optimum solder
connection.
3 • Pre-fluxed solder preform provides a
controlled soldering process.
• The SGRS series has an adhesive insert to
4
provide immersion sealing performance.
• One piece design.
• Accommodates a wide variety of
5
conductor types, quantities and sizes.
• Colour coded for easy identification.
6 Specifications & Approvals
Solder & Flux Characteristics • UL CUL E87681
• Sn60 Pb40 with ROM 1flux per • RB-109
7 ANSI-J-STD-004

8 Part Number Wire Range Max. Current Length Colour Code
2
mm (CMA) Rating
SGRS-1 0.7 - 2.4 (1400 - 4800) 17 Amps 34.8mm Green
9
SGRS-2 2.0 - 4.0 (4000 - 8000) 28 Amps 34.2mm Red
SGRS-3 3.5 - 8.0 (7000 - 16000) 56 Amps 42.0mm Blue
10
SGRS-4 7.5 - 12.0 (15000 - 24000) 84 Amps 41.5mm Yellow
L
11 This product is also available as ‘Ring Terminals’,
please see SGRT later in this section.
ØA
12
Sealing insert
13
Product Characteristics Product Performance
Voltage drop <2.0mV
14
Tensile strength Exceeds strength of individual conductors
Dielectric strength 2.0kV
15
Temperature rating -55ºC to +125ºC
Insulation resistance after immersion 100 megaohms
16 Insulation performance 300 mbar (for specific combinations refer to RB-109)
Voltage rating 600V
17
Notes:
2
• To calculate mm or CMA refer to page earlier in this section
18 • Heat guns are recommended for the installation of these devices: HL2010E and CV198X with the correct
reflector added. See Application Equipment Section.

238 sales@is-rayfast.com | +44(0)1793 616700