Page 199 - IS-Rayfast Catalogue - Issue 9, 2017

Moulded Parts
222D921 to 963
As supplied
Lipped
Right Angle 90º, long tail boot
J Dia.
Mechanical protection and cable connector 1
H strain relief. Ideal for applications where only a
small number of contacts are utilised, resulting
in the need for a high ratio boot to match the 2
After Recovery
connector to cable diameter.
P
U Ordering Information 3
JW • Please specify the product name, size,
material, coating and any modifications 4
required, as per Part Number System
R
earlier in this section.
J Dia.
• Adhesive coating is optional. If added
HW 5
the entry dimensions will be reduced by
H Dia.
1.5mm.
JO • Moulded parts are individually packaged. 6
• Dimensions apply to all available materials
unless otherwise stated.
7
Product Dimensions Selection Table 8
Dimensions as Supplied Dimensions After Recovery
Dimension H J H J P ±10% R ±10% U ±10% JO ±10% HW ±10% JW ±10% Weight
9
Material All 3, 4, 25 12, 100
Part Number
10
222D921 19.3 6.3 4.5 13.0 2.1 44.5 16.3 5.6 21.8 1.52 1.14 1.9G
222D932 26.1 7.6 5.6 19.1 2.6 67.3 18.0 8.4 29.2 1.78 1.14 3.7G
11
222D953 34.2 9.6 6.6 26.0 3.0 81.3 18.8 11.4 36.3 1.78 1.14 6.4G
222D963 43.6 11.4 7.8 34.1 3.6 115.6 21.3 15.5 47.0 1.78 1.14 13.0G
12
All dimensions in mm unless otherwise stated. Weight is based on polyolefin part
Injection and potting ports also available see part number system earlier in this section
13

14

Materials Available Environmental Adhesives Available
15
Material Material Description Optional Pre-coat Optional User Applied
-3 Semi-rigid polyolefin /42 or /86 S-1017 or S-1048
16
-4 Flexible polyolefin /42 or /86 S-1017 or S-1048
-12 Fluoro-elastomer N/A S-1255-04
-25 Fluid resistant elastomer /42 or /86 or /225 S-1017 or S-1048 or S-1125 17
-100 Polyolefin, Zerohal /86 or /180 S-1048 or S-1030
18
For more information on materials and adhesives, please refer to relevant sections of this catalogue.

www.is-rayfast.com 197