Page 200 - IS-Rayfast Catalogue - Issue 9, 2017

Moulded Parts
Micro Moulded Boots
Lipped
Straight and Right Angle 90º boots

1 202A111-xx-G07 222A111-xx-G07
Before Recovery Before Recovery
2

3

4

5
After Recovery

6 After Recovery

7

8 Product Dimensions Selection Table
Dimensions as Supplied Dimensions After Recovery
9 Dimension H J H J P R S T JO JW HW
±10% ±10% ±10% ±20% ±20% ±20% ±20%
Material 25,12*
10 Part Number
202A111-xx-G07 17 17 7.9 2.2 25 14 3.0 1.0 6.0 1.7 1.0
11 222A111-xx-G07 18 18 7.9 2.2 17 20 15.5 1.7 5.0 1.7 1.0
Note * Please check dimensions for -12 material as may differ, as supplied dimensions may be slightly reduced due to the nature of
the material. After recovery sizes are not affected.
12 All dimensions in millimetres unless otherwise stated.

13

14

Materials Available Environmental Adhesives Available
15
Material Material Description Optional Pre-coat Optional User Applied
-12 Fluoro-elastomer /225 S-1255-04
16 -25 Fluid resistant elastomer /225 S-1017 or S-1048 or S-1125

17

18
For more information on materials and adhesives, please refer to relevant sections of this catalogue.

198 sales@is-rayfast.com | +44(0)1793 616700