Page 201 - IS-Rayfast Catalogue - Issue 9, 2017

Moulded Parts
Micro Moulded Boots
Lipped
Straight and Right Angle 90º boots

204W221-xx 224W221-** Micro Moulded Boots 1
224W221-xx
Before Recovery As supplied Before Recovery 2

3

4

5
After Recovery After recovery After Recovery 6

Product Dimensions Selection Table Product Dimensions Selection Table 7
8
Dimensions as Supplied Dimensions After Recovery Dimensions as Supplied Dimensions After Recovery
P R S T JO JW HW P R S T U X JO HW JW
Dimension H J H J Dimension H J H J 9
±10% ±10% ±10% ±20% ±20% ±20% ±20% ±10% ±10% ±10% ±10% ±10% ±10% ±10% ±20% ±20%
Material 25,12* Material 25,12*
10
Part Number Part Number
202A111-xx-G07 17 17 7.9 2.2 25 14 3.0 1.0 6.0 1.7 1.0 204W221-xx 11 11 9.3 2.1 19 6.5 - 1.5 0.55 2.4 6.6 1.0 0.5
222A111-xx-G07 18 18 7.9 2.2 17 20 15.5 1.7 5.0 1.7 1.0 224W221-xx 11 11 9.3 2.1 12.3 13 11 1.5 0.55 2.4 6.6 1.0 0.5 11
Note * Please check dimensions for -12 material as may differ, as supplied dimensions may be slightly reduced due to the nature of Note * Please check dimensions for -12 material as may differ, as supplied dimensions may be slightly reduced due to the nature of
the material. After recovery sizes are not affected. the material. After recovery sizes are not affected.
All dimensions in millimetres unless otherwise stated. All dimensions in millimetres unless otherwise stated. 12

13

14

Materials Available Environmental Adhesives Available
15
Material Material Description Optional Pre-coat Optional User Applied
-12 Fluoro-elastomer /225 S-1255-04
16
-25 Fluid resistant elastomer /225 S-1017 or S-1048 or S-1125
17

18
For more information on materials and adhesives, please refer to relevant sections of this catalogue.

www.is-rayfast.com 199