Page 206 - IS-Rayfast Catalogue - Issue 9, 2017

Moulded Parts
301A011 to 048 As supplied
Transitions
‘T’ Transition, heat shrink boots

1 Used for mechanical protection and cable
strain relief. Ideal for cable harness applications
where cable branches and breakouts are
2 required.

Ordering Information
3 After Recovery
• Standard colour Black.
• Size selection please refer to table below.
P
4 • Packaged individually S W
• Please specify the product name, size,
material, coating and any modifications
J Dia. K Dia.
5 required, as per Part Number System
earlier in this section.
• Adhesive coating is optional. If added
6 the entry dimensions will be reduced by T
1.5mm.
7 H Dia.

8 Product Dimensions Selection Table
Dimensions as Supplied Dimensions After Recovery
9 Dimension J H, K H, J, K P S T W Weight
Nom. ±10% ±10% ±10% ±30%
Part Number
10
301A011 12.0 6.6 3.6 29.7 15.1 - 1.0 0.9g
301A022 24.0 13.2 6.9 58.7 29.5 17.5 1.5 4.1g
11
301A034 48.0 26.9 13.5 120.1 60.2 35.6 2.3 31.3g
301A048 100.0 55.6 30.2 246.4 123.2 70.9 3.0 253.1g
12
All dimensions are in mm unless otherwise stated. Weight is based on polyolefin part
Optional ‘Injection’ (S) and ‘Vent’ (T) ports indicated above, see part number system earlier in this section.
13

14

Materials Available Environmental Adhesives Available
15
Material Material Description Optional Pre-coat Optional User Applied
-3 Semi-rigid polyolefin /42 or /86 S-1017 or S-1048
16 -4 Flexible polyolefin /42 or /86 S-1017 or S-1048
-12 Fluoro-elastomer N/A S-1255-04
17 -25 Fluid resistant elastomer /42 or /86 or /225 S-1017 or S-1048 or S-1125
-100 Polyolefin, Zerohal /86 or /180 S-1048 or S-1030
18
For more information on materials and adhesives, please refer to relevant sections of this catalogue.

204 sales@is-rayfast.com | +44(0)1793 616700