Page 209 - IS-Rayfast Catalogue - Issue 9, 2017

Moulded Parts
342A112 to 138
As supplied
Transitions
45º Transition, heat shrink boots

Used for mechanical protection and cable 1
strain relief. Ideal for cable harness applications
where cable branches and breakouts are
required. 2

Ordering Information
After Recovery • Standard colour Black. 3
• Size selection please refer to table below.
• Packaged individually
4
• Please specify the product name, size,
material, coating and any modifications

required, as per Part Number System 5
earlier in this section.
• Adhesive coating is optional. If added
the entry dimensions will be reduced by 6
1.5mm.
7

Product Dimensions Selection Table 8
Dimensions as Supplied Dimensions After Recovery
P R S
Dimension H J, K H J,K Weight 9
±10% ±10% ±10%
Part Number
342A112 13.2 6.6 6.1 3.0 45.0 23.0 21.0 2.3g 10
342A124 26.9 13.2 12.4 6.1 90.0 42.0 43.0 15.9g
342A138 55.6 26.9 25.4 12.4 183.0 96.0 86.0 122g 11
All dimensions in mm unless otherwise stated. Weight is based on polyolefin part
Optional ‘Injection’ (S) and ‘Vent’ (T) ports indicated above, see part number system earlier in this section.
12

13

14

Materials Available Environmental Adhesives Available
15
Material Material Description Optional Pre-coat Optional User Applied
-3 Semi-rigid polyolefin /42 or /86 S-1017 or S-1048
16
-4 Flexible polyolefin /42 or /86 S-1017 or S-1048
-12 Fluoro-elastomer N/A S-1255-04
-25 Fluid resistant elastomer /42 or /86 or /225 S-1017 or S-1048 or S-1125 17
-100 Polyolefin, Zerohal /86 or /180 S-1048 or S-1030
18
For more information on materials and adhesives, please refer to relevant sections of this catalogue.

www.is-rayfast.com 207