Page 211 - IS-Rayfast Catalogue - Issue 9, 2017

Moulded Parts
382A012 to 046
As supplied
Transitions
‘Y’ Transition, heat shrink boots

J Dia.
Used for mechanical protection and cable
H Dia. 1
strain relief. Ideal for cable harness applications
where balanced cable branches and breakouts
K Dia.
are required. 2
Ordering Information
After Recovery • Standard colour Black. 3
J Dia. • Size selection please refer to table below.
JW
• Packaged individually
S 4
• Please specify the product name, size,
HW T
material, coating and any modifications

required, as per Part Number System
H Dia. earlier in this section. 5
KW • Adhesive coating is optional. If added
K Dia.
the entry dimensions will be reduced by 6
1.5mm.
7
Product Dimensions Selection Table 8
Dimensions as Supplied Dimensions After Recovery
S T HW JW & KW
Dimension H J, K H J,K Weight 9
±10% ±10% ±20% ±20%
Part Number
10
382A012 13.2 6.6 6.1 3.3 23.9 15.5 1.52 1.02 1.7g
382A023 26.9 13.2 12.4 6.1 53.3 33.0 2.54 1.52 13.6g
382A034 38.6 26.9 18.0 12.4 78.7 55.9 3.05 2.54 55.5g 11
382A046 55.6 26.9 25.9 12.7 111.8 71.1 4.57 2.54 93.4g
All dimensions in mm unless otherwise stated. Weight is based on polyolefin part 12
Optional ‘Injection’ (S) and ‘Vent’ (T) ports indicated above, see part number system earlier in this section.

13

14

Materials Available Environmental Adhesives Available
15
Material Material Description Optional Pre-coat Optional User Applied
-3 Semi-rigid polyolefin /42 or /86 S-1017 or S-1048
16
-4 Flexible polyolefin /42 or /86 S-1017 or S-1048
-12 Fluoro-elastomer N/A S-1255-04
-25 Fluid resistant elastomer /42 or /86 or /225 S-1017 or S-1048 or S-1125 17
-100 Polyolefin, Zerohal /86 or /180 S-1048 or S-1030
18
For more information on materials and adhesives, please refer to relevant sections of this catalogue.

www.is-rayfast.com 209