Page 208 - IS-Rayfast Catalogue - Issue 9, 2017

Moulded Parts
342A012 to 058 As supplied
Transitions
45º Transition, heat shrink boots

1 Used for mechanical protection and cable H Dia. J Dia.
strain relief. Ideal for cable harness applications
where cable branches and breakouts are
2 required.
K Dia.
Ordering Information
3 • Standard colour Black. After Recovery
• Size selection please refer to table below.
• Packaged individually P
4 U
• Please specify the product name, size,

material, coating and any modifications HW T JW
required, as per Part Number System
5
earlier in this section.
H Dia. J Dia.
• Adhesive coating is optional. If added
6 the entry dimensions will be reduced by
1.5mm. KW
K
7
8 Product Dimensions Selection Table
Dimensions as Supplied Dimensions After Recovery
9 Dimension H, J K H, J K P T U HW & JW KW Weight
±10% ±10% ±10% ±20% ±20%
Part Number
10 342A012 13.2 6.6 6.9 3.6 49.3 19.6 19.6 1.52 1.02 2.6g
342A024 26.9 6.6 12.7 3.6 92.5 31.8 39.6 2.54 1.02 16.1g
11 342A034 26.9 13.2 13.7 6.1 144.8 50.8 50.8 2.54 1.52 25.0g
342A048 55.6 13.2 26.9 6.9 184.9 63.5 63.5 4.57 1.52 124g
12 342A058 55.6 26.9 26.9 13.7 203.7 66.0 66.0 4.57 2.54 138g
All dimensions in mm unless otherwise stated. Weight is based on polyolefin part
Optional ‘Injection’ (S) and ‘Vent’ (T) ports indicated above, see part number system earlier in this section.
13

14

Materials Available Environmental Adhesives Available
15
Material Material Description Optional Pre-coat Optional User Applied
-3 Semi-rigid polyolefin /42 or /86 S-1017 or S-1048
16 -4 Flexible polyolefin /42 or /86 S-1017 or S-1048
-12 Fluoro-elastomer N/A S-1255-04
17 -25 Fluid resistant elastomer /42 or /86 or /225 S-1017 or S-1048 or S-1125
-100 Polyolefin, Zerohal /86 or /180 S-1048 or S-1030
18
For more information on materials and adhesives, please refer to relevant sections of this catalogue.

206 sales@is-rayfast.com | +44(0)1793 616700