Page 210 - IS-Rayfast Catalogue - Issue 9, 2017

Moulded Parts
362A014 to 114 As supplied
Transitions
30º Transition, heat shrink boots
J Dia.
1 Used for mechanical protection and cable H Dia.
strain relief. Ideal for cable harness applications
where cable branches and breakouts are K
2 required.

Ordering Information
3 After Recovery
• Standard colour Black.
• Size selection please refer to table below. P
4 • Packaged individually HW S T JW
• Please specify the product name, size,
material, coating and any modifications
5 required, as per Part Number System H Dia. J Dia.
earlier in this section.
• Adhesive coating is optional. If added
6 the entry dimensions will be reduced by
1.5mm.
KW
7 K Dia.

8 Product Dimensions Selection Table
Dimensions as Supplied Dimensions After Recovery
9 Dimension H, J K H, J K P S T HW & JW KW Weight
±10% ±10% ±10% ±20% ±20%
Part Number
10
362A014 30.5 20.3 15.7 10.7 82.6 31.8 21.1 2.54 1.78 20.4g
362A024 35.6 15.2 18.3 8.6 63.5 19.1 22.4 2.54 1.52 13.3g
11 362A114 35.6 10.2 18.8 5.3 61.0 19.1 21.3 2.79 1.52 13.2g
All dimensions in mm unless otherwise stated. Weight is based on polyolefin part
Optional ‘Injection’ (S) and ‘Vent’ (T) ports indicated above, see part number system earlier in this section.
12

13

14

Materials Available Environmental Adhesives Available
15
Material Material Description Optional Pre-coat Optional User Applied
-3 Semi-rigid polyolefin /42 or /86 S-1017 or S-1048
16 -4 Flexible polyolefin /42 or /86 S-1017 or S-1048
-12 Fluoro-elastomer N/A S-1255-04
17 -25 Fluid resistant elastomer /42 or /86 or /225 S-1017 or S-1048 or S-1125
-100 Polyolefin, Zerohal /86 or /180 S-1048 or S-1030
18
For more information on materials and adhesives, please refer to relevant sections of this catalogue.

208 sales@is-rayfast.com | +44(0)1793 616700