Page 213 - IS-Rayfast Catalogue - Issue 9, 2017

Moulded Parts
562A011 to 067
As supplied
Transitions
K Dia.
J Dia. 1 to 4 Transition, heat shrink boots
H Dia. Used for mechanical protection and cable 1
strain relief. Ideal for cable harness applications
N Dia. where multiple cable branches are required.
L Dia. 2
Ordering Information
W • Standard colour Black.
After Recovery • Size selection please refer to table below. 3
J Dia. • Packaged individually
T
HW • Please specify the product name, size,
U 4
material, coating and any modifications
K Dia. required, as per Part Number System
H Dia.
earlier in this section.
• Adhesive coating is optional. If added 5
the entry dimensions will be reduced by
L Dia.
1.5mm. 6
N Dia.
P
7
Product Dimensions Selection Table 8
Dimensions as Supplied Dimensions After Recovery
P T U HW W
Dimension H J, K, L, N H J, K, L, N Weight 9
±10% ±10% ±10% ±20% ±20%
Part Number
562A011 13.2 6.6 6.9 3.4 24.1 43.9 18.0 1.52 1.02 3.6g 10
562A022 19.3 9.4 9.7 5.3 35.6 43.2 23.1 1.78 1.02 6.2g
562A032 19.3 13.2 9.7 6.9 49.3 50.5 25.4 1.78 1.52 13.6g 11
562A043 26.9 13.2 13.0 6.9 49.3 65.8 33.5 2.54 1.52 18.6g
562A054 38.6 19.3 18.5 9.7 71.9 95.3 46.5 3.05 1.78 54.4g 12
562A067 55.6 26.9 26.7 13.0 101.6 135.1 65.5 4.57 2.54 150g
All dimensions in mm unless otherwise stated. Weight is based on polyolefin part
Optional ‘Injection’ (S) and ‘Vent’ (T) ports indicated above, see part number system earlier in this section. 13

14

Materials Available Environmental Adhesives Available
15
Material Material Description Optional Pre-coat Optional User Applied
-3 Semi-rigid polyolefin /42 or /86 S-1017 or S-1048
16
-4 Flexible polyolefin /42 or /86 S-1017 or S-1048
-12 Fluoro-elastomer N/A S-1255-04
-25 Fluid resistant elastomer /42 or /86 or /225 S-1017 or S-1048 or S-1125 17
-100 Polyolefin, Zerohal /86 or /180 S-1048 or S-1030
18
For more information on materials and adhesives, please refer to relevant sections of this catalogue.

www.is-rayfast.com 211