Page 212 - IS-Rayfast Catalogue - Issue 9, 2017

Moulded Parts
462A011 to 060 As supplied
Transitions
1 to 3 Transition, heat shrink boots J Dia.
H Dia. K Dia.
1 Used for mechanical protection and cable
strain relief. Ideal for cable harness applications L Dia.
where multiple cable branches are required.
2
Ordering Information
• Standard colour Black.
3 • Size selection please refer to table below. After Recovery
• Packaged individually
• Please specify the product name, size, P J Dia.
4 T
material, coating and any modifications
required, as per Part Number System HW U KW Typ.
earlier in this section.
5
• Adhesive coating is optional. If added
H Dia. K Dia.
the entry dimensions will be reduced by
6 1.5mm.
L Dia.
7

8 Product Dimensions Selection Table
Dimensions as Supplied Dimensions After Recovery
9 Dimension H J, K, L H J, K, L P T U HW KW Weight
±10% ±10% ±10% ±20% ±10%
Part Number
10 462A011 13.2 6.6 6.6 3.6 46.2 30.5 15.7 1.52 1.02 2.3g
462A023 26.9 13.2 13.2 6.9 93.2 57.2 33.0 2.54 1.52 16.2g
11 462A034 38.6 19.3 18.8 9.7 135.1 88.9 45.7 3.05 1.78 38.3g
462A046 55.6 26.9 25.4 12.4 192.0 121.9 71.1 4.57 3.05 143g
12 462A060 91.4 45.7 54.6 27.4 390.4 254.0 127.0 7.11 4.57 862g
All dimension in mm unless otherwise stated. Weight is based on polyolefin part
Optional ‘Injesction’ (S) and ‘Vent’ (T) ports indicated above, see part number system earlier in this section.
13

14

Materials Available Environmental Adhesives Available
15
Material Material Description Optional Pre-coat Optional User Applied
-3 Semi-rigid polyolefin /42 or /86 S-1017 or S-1048
16 -4 Flexible polyolefin /42 or /86 S-1017 or S-1048
-12 Fluoro-elastomer N/A S-1255-04
17 -25 Fluid resistant elastomer /42 or /86 or /225 S-1017 or S-1048 or S-1125
-100 Polyolefin, Zerohal /86 or /180 S-1048 or S-1030
18
For more information on materials and adhesives, please refer to relevant sections of this catalogue.

210 sales@is-rayfast.com | +44(0)1793 616700