Page 215 - IS-Rayfast Catalogue - Issue 9, 2017

Moulded Parts
TC Caps
2.5:1 Polyolefin
shrink Flame retardant

Widely used for wire terminations because 1
of their light weight, small size and durability.
Vibration-proof caps are used to insulate and
terminate dead-end electrical cables, fixtures, 2
connectors and other electrical equipment.
Features & Benefits 3
• 2.5:1 Shrink ratio
• Flame retardant
4
• Rapid and simple installation
RoHS Operating Temperature
compliant 5
• From -55ºC to +135ºC
Specifications & Approvals Installation 6
• UL E85381 600v, 125ºC • Minimum shrink temperature +110ºC
• Minimum full recovery +135ºC
7

Length Supplied Inside Diameter Wall Thickness Length Supplied Inside Diameter Wall Thickness 8
Nominal Minimum Maximum Maximum Nominal Part Number Nominal Minimum Maximum Maximum Nominal Part Number
Overall Open Barrel Supplied Recovered Recovered Overall Open Barrel Supplied Recovered Recovered
9
25.4 12.7 3.18 0.58 1.22 PD-CAP-1/8-0 19.1 10.2 1.6 0.8 0.51 TC-CAPS-4001-9
25.4 15.2 4.75 1.52 1.57 PD-CAP-3/16-0 25.4 14.0 3.2 1.3 0.64 TC-CAPS-4003-2
10
28.4 15.2 6.35 2.03 1.98 PD-CAP-1/4-0 28.6 14.0 6.4 2.5 0.69 TC-CAPS-4005-8
31.8 18.3 9.53 2.29 2.08 PD-CAP-3/8-0 Wall thickness will be less if tubing recovery is restricted during shrinkage.
All dimensions in millimetres unless otherwise stated. 11
38.1 21.6 12.7 2.29 2.54 PD-CAP-1/2-0
Wall thickness will be less if tubing recovery is restricted during shrinkage.
All dimensions in millimetres unless otherwise stated. 12

13

14

15

16

Part Number Example; TC-CAPS-4003-2 25.4mm inside diameter, Red end cap. 17
Ordering Information
Standard colour: 9=White, 2=Red, 8=Grey. One colour per size only, as per table
Size selection: The largest size that will recover snugly over the component(s). 18

www.is-rayfast.com 213